|
PROFILE
| PRODUCTS
| PROCESS
| ENQUIRY
|
ARASAN
- ATOMISED ALUMINIUM POWDER
Material Safety Data Sheet - Aluminium Paste
1. Identification of the Substance
/ Preparation and of the company / undertaking
Grade : Aluminium Paste Leafing, Non
– Leafing & Sparkling Grades
Trade Name : 10L, 12L, 30L, 30L LUXAL, 12NL, 30NL, ARASANLUX
111,
ARASANLUX 222 & ARASANLUX 333
Manufacturer
:
The Arasan Aluminium Industries Private Limited
1-C/4, Thiruthangal Road,
SIVAKASI. 626 123. Phone : 91 - 4562 - 230916, 289 848
2. Composition information on ingredients
Chemical Characterization
Aluminium, additives and solvents.
Identification Number(s)
EINECS Number : 231-072-3 - Aluminium
CAS Number : 7429 - 90-5 - Aluminium
3. Hazards identification
Hazard description :
F - Highly Flammable
Information concerning particular hazards for human and environment
:
R 11 Highly Flammable
R 66 Repeated exposure may cause skin dryness or cracking
R 67 Vapours may cause drowsiness and dizziness.
4. First Aid measures
General Information :
Take affected persons out into the fresh air.
Take affected persons out of danger area and lay down.
Immediately remove any clothing soiled by the product.
After Inhalation : Supply fresh air: Consult doctor in case
of complaints
After Skin Contact :
Generally the product does not irritate the skin.
Immediately wash with water and soap and rinse thoroughly.
After Eye Contact : Rinse opened eye for several minutes under
running water
After Swallowing : If symptoms persists consult doctor.
5. Fire Fighting measures
Suitable extinguishing Agents :
Special powder for metal fires, do not use water.
Dry sand.
ABC Powder
For Safety reasons unsuitable extinguishing agents :
Water, Carbon dioxide.
Protective equipment :
Wear fully protective suit
6. Accidental Release measures
Person-related Safety precautions :
Wear protective equipment. Keep unprotected persons away.
Avoid formation of dust.
Keep away from ignition sources.
Measures for environmental protection :
Do not allow product to reach sewage system or any water course.
Measures for Cleaning / Collecting :
Do not flush with water or aqueous cleaning agents.
Absorb with liquid-binding material ( Sand, Diatomite, acid binders,
universal binders, sawdust).
Ensure adequate ventilation.
Pick up mechanically.
7. Handling & Storage
Handling :
Information for safe handling :
Store in Cool, dry place in tightly closed receptacles.
Keep receptacles tightly sealed.
Prevent formation of dust.
Any unavoidable deposit of dust must be regularly removed.
Information about fire - and explosion Protection :
Keep ignition sources away - Do not smoke.
Protect against electrostatic charges.
Protect from heat.
Dust can combine with air to form an explosive mixture.
Storage :
Requirements to be met by storerooms and receptacles : Store
in a cool location
Information about storage in one common storage facility :
Store away from flammable substances.
Further information about storage conditions:
Keep container tightly sealed.
Store in cool, dry conditions in well sealed receptacles.
Protect from humidity and water.
8. Exposure controls / Personal Protection
Ingredients
with limit values that require monitoring at the work place :
Not required.
Additional information: The lists valid during the making
were used as basis.
PERSONAL
PROTECTIVE EQUIPMENTS :
General
protective and hygienic measures :
Wash hands before breaks and at the end of work.
Keep away from foodstuffs, beverages and feed.
Immediately remove all soiled and contaminated clothing.
Don't eat, drink, smoke or sniff while working.
Respiratory
Protection : Filter P2
Protection
on hands :
Leather gloves,
Preventive skin protection by use of skin-protecting agents is recommended
Prior to contact with the water insoluble substance / product /
preparation apply water soluble skin protecting agent (fat-free
film former or O/W emulsions)
Exposure
controls / Personal Protection
Penetration time of glove material :
The exact break trough time has to be found out be the manufacturer
of the protective gloves and has to be observed.
Eye Protection:
Safety glasses
Body Protection : Protective work clothing.
9. Physical and Chemical Properties
General
Information
Form : Pasty
Color : Silver-Coloured
Odour : Characteristic
Melting point : Undertermined
Boiling point : 150° C
Flash Point : Not applicable
Self-Igniting : Product is not Self-Igniting
Ignition temperature : > 600 ° C
Danger of explosion : Product is not explosive. However formation
of explosive air vapour mixture are possible
Density : 1.3 to 1.7g/cm3
Solubility in / miscibility with water : Insoluble
10.
Stability and Reactivity
Thermal decomposition / Conditions to be avoided :
No Decomposition if used according to specifications.
No decomposition if used and stored according to specifications.
Dangerous reactions
Contact with water releases flammable gases.
Risk of dust explosion if enriched with fine dust in the presence
of air.
Risk of dust explosion.
Dangerous decomposition products : No dangerous decomposition
products known.
11. Toxicological information
Acute
toxicity :
Primary irritant effect :
On the skin : No irritant effect.
On the eyes : No irritating effect.
Sensitization : No sensitizing effects known.
12. Ecological information
General Notes : Generally not hazardous for water.
13. Regulatory Information
Code letter and hazard designation of product :
Risk phrases:
11 Highly flammable.
66 Repeated exposure may cause skin dryness or cracking.
67 Vapours may cause drowsiness and dizziness.
Safety phrases:
7/8, Keep container tightly closed and dry.
43 In case of fire, use dry sand. Never use water.
14. Other Information
In this information is based on our present knowledge. However,
this shall not constitute a guarantee for any specific product features
and shall not establish a legally valid contractual relationship.
|
